How Eliminating A Component Improved My System's Sound

AR-QolSignalCOmpletionStage.jpg

Sometime back in about 2012 a product hit the audiophile market that took off to a very fast start. Glowing reviews. Within a few years things had slowed considerably and the next step was the inevitable closure.  This product touted a retrieval of transient detail and any part of the signal overshadowed by larger scale movements. Whereupon first hearing one, I was mesmerized and immediately purchased one for my system. I placed it squarely between the preamp and amp and basically forgot about it. I thought it would be a welcomed, permanent part of my system. Why? Simple, I loved what the component did for musical playback. Despite the intense controversy surrounding it, I liked it right away which continued until mid February 2019. 

The BSG qol Signal Completion Stage operated on the premise of something they called "Phase Layering." Basically, the input signal was copied, split into multiple segments and every other segment phase shifted one hundred eighty degrees. The final step was combining the segments back into one, merge that with the original signal, and pass everything along to the amp. BSG claimed the goal was better transient retrieval, better clarity and the extraction of information already present in the recording but obscured by the recording itself. Needless to say, there were scores of detractors. 

AR-MixingBoardSmallFormat.jpgWhat got me thinking about the qol this past February was a two year old email I recently discovered. Back in 2016, I had a multiple Grammy award winning recording engineer visit my home to demo my KEF Blades. He was thinking about buying some for his studio and wanted to see how they sounded. He was very curious about the qol and about a week later I received an email from him. Here is what he had to say about the qol Signal Completion Stage:

"Also, after researching your BSG Completion Stage further, it is altering the balance between the Mid portion of the signal (everything in the mix that is in the center image) and the Side signal (everything left-right). We call this processing mid/side in the mastering stage. It has the ability to seriously alter imaging, ambiance and frequency response from what was intended in the studio."  

Not a very glowing report.

AR-StereoImaging.jpg

After rediscovering that email, I decided to press the "Bypass" button on the front of the qol and temporarily take it out of the signal chain. I quickly realized at the very least, I liked the sonic picture every bit as much without the qol as with. On quite a few of my favorite five star songs, I actually liked it better. After about a week, I decided to remove it completely from the signal chain. My reasoning? Even in bypass the signal still flowed through the circuits - possibly altering what I should or could be hearing. I disconnected the power cord and the interconnects and connected my preamp directly to the amplifier. And wonder of wonders, the sonic improvement was readily noticeable. Best of all, the interconnects I removed from the qol were much higher quality than the interconnects between the phonostage and the preamp.

Replacing them seriously improved my analog section. In fact, it has never sounded as good as it now does. 

AR-SettingsCorrect.jpgI suppose this set me on some sort of mission. I decided to check every setting on every component to ensure everything was set correctly. I found the various filter settings on my DAC were actually turned off. How did that happen, and when? Good question, I have no idea. My only guess was I was playing around one day and didn't put things back as they should have been. I also found the XLR gain on the DAC was set to increase by +6 Db. Nope, don't want that either. I set that back to its preferred setting of 0 gain. The up conversion was correct - none. Next step was the preamp settings. Fortunately, they were all correct - as was everything else. 

I settled back in my chair, put on some familiar music, closed my eyes and listened. I was shocked at how much more natural and tonally accurate things sounded than before. I spent an entire afternoon playing many of my one hundred or so five star songs, albums, streaming and basically having a grand ole time. I left my audio room about four hours later with a big Cheshire cat grin on my face. 

AR-Complacent.jpgSeveral things come to mind here. One, do not trust complacency. Just because I had done things one particular way in the past does not mean it might be the best way right now, today. Two, check system settings every so often. Hey, I know, this sounds like simple, basic, plainly obvious things any audiophile should do. I feel it is so very easy to become accustomed to what we hear, and how our systems present things, that sometimes we lose sight of paying attention to details. A quick, thirty second check will confirm that your settings are correct. Three, there is merit, in certain instances, to the notion of a shorter signal path. Yes, I heard an improvement with the qol set to bypass. When it was removed completely, then I heard the real improvement.

I suppose it is fair to say I fell victim to a desire for musical simplicity. I take great pleasure in walking into my audio room, picking up the iPad, picking out some music (or better still let the playback software do it for me), close my eyes and relax. 

AR-MoralOfTheStory.jpg

My system, at least in digital, allows this to be easily accomplished. Doing so also allows complacency, which if one is not careful, might lead to not recognizing an incorrect setting. Moral of the story, check your system settings. Even if you know they are right. Don't discount the shortest signal path idea. It may not make any difference at all. Then again, maybe it will. And above all else, happy listening!

comments powered by Disqus

Audiophile Review Sponsors